sup everyone, this is my first post in here and i need your expertise. im pretty good at wiring up things but alarms seem to give me the most trouble. what im use to wiring most of the time is industrial machinery being a service tech. what i have done is i purchased a trunk solenoid kit and need to hook up the wire to the aux wire in the alarm. i went through every wire tryin to find the output for the trunk button but got nowhere. the alarm is a autopage rf410. can anyone lead me in the right direction, any input is appreciated!!!!! is there some programing that i have to do before i can get an output? plz let me know
look on yuour wiring info and see if it talks about a trunk release or 2nd or 3rd - output....you can use one of those wires....
-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
i wasnt given the wiring diagram but i figured it out and it now works. i now truely understand it when you guys say negative output lol. but thanks for your input. now im trying to figure out how to use relays for the third ch to roll down two windows and open a sunroof. first i have to figure out which wire is the third ch and the operational manual says that, that ch has programable timing from 2 sec - 2 min. i also have to figure how to program it for about 10 sec or so to open the three windows. if anyone has any info as to that plz give me some input or if anyone has the diagram or knows how to program it plz let me know. ALL INPUT IS APPRECIATED THANX