00’ Maxima problems.. help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29674
Printed Date: May 17, 2024 at 4:56 PM

Topic: 00’ Maxima problems.. help

Posted By: proinstall
Subject: 00’ Maxima problems.. help
Date Posted: April 04, 2004 at 4:56 PM

Okay.. about 1 week ago I put in a 2WSS-AS Compustar in this 00' Nissan Maxima.. it worked well no problems..

1 week later (today) all of a sudden his guage cluster fuse pops.. about 5 seconds after you put it in drive while the car is running.... I've tried it again and again with about 10 fuses.. also, the battery wont charge and the alternator was tested to be just fine.. any ideas? I'm 100% stumped on this one.. I checked all my wiring, tach was connected behind the guage cluster as per techsoft.. maybe I opened another wire on accident.. but no, it was perfectly fine..

All my connections are soldered and taped with 33+, no loose connections grounding out anywhere... it was a clean install I dont get whats going on..

Replies:

Posted By: bmf1000d
Date Posted: April 04, 2004 at 5:16 PM

has the customer added anything to his car snice the install such as a tach or dash lights?

i would go back and triple check the wires again.

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Posted By: proinstall
Date Posted: April 04, 2004 at 6:19 PM

No.. nothing was added..