Hyundai Elantra 2002 Australia

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29779
Printed Date: July 14, 2025 at 6:59 PM

Topic: Hyundai Elantra 2002 Australia

Posted By: badwolf
Subject: Hyundai Elantra 2002 Australia
Date Posted: April 06, 2004 at 12:57 AM

Hi,

I have checked the other posts and am confused as to how to connect the keyless door locks to my alarm.

There is 2 black wires from the alarm with negitive pulse ..unlock and lock...by reading other post i found the control unit behind ashtray in middle of dash.

My problem is..... do I just find the wires at this module..... and join with the 2 wires from the alarm on to each colour (unlock /lock).

Also will the colour code for the Elantra be the same for Australia as in the USA model?

I have been baking in the hot sun for a week trying to sort out theses 2 wires, please help.

Thank you

Tony

Replies:

Posted By: Velocity Motors
Date Posted: April 06, 2004 at 1:01 AM

blk/org or blue *1 |F |white 22 pin plug in DKP

https://www.velocitymotorsport.com/images/install_notes/148.jpg

Use the above information to wire into the Elantra's type-F one wire system.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: badwolf
Date Posted: April 07, 2004 at 9:06 PM

Velocity Motors wrote:

blk/org or blue *1 |F |white 22 pin plug in DKP
https://www.velocitymotorsport.com/images/install_notes/148.jpg
Use the above information to wire into the Elantra's type-F one wire system.

Thank you Jeff for the information.....will give it a go...fingers X

Tony

Posted By: badwolf
Date Posted: April 08, 2004 at 12:22 AM

Hi again,

the blue wire has +12 volts and the ORANGE / blck 0 volts

i think this central locking on the elantra is a two wire system (negitive???) it has a rod from the keylock which triggers the door locks...

the alarm i am using is a RHINO model (RA) made in oz

the instructions say to use 2 relays it vehicle is positive pulse power lock system........ or none if negitive pulse system...

all the wiring is black and is so hard to keep track of the wires.

this is sooo confusing.....please need more help

thanks

Tony

Posted By: badwolf
Date Posted: April 08, 2004 at 2:26 AM

BUMP!