Resistor help!

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29783
Printed Date: July 15, 2025 at 12:48 PM

Topic: Resistor help!

Posted By: hivolt
Subject: Resistor help!
Date Posted: April 06, 2004 at 1:24 AM

Ok, I am new to this whole resistor thing. This is only my second install and the first was on a 91 accord so I didnt need any. I have a 95 Mazda Millenia and it says to use a 1K resistor to bypass my factory alarm. First of all where can I buy a 1k Resistor, and how do you wire them up? I see in the resistor second of the site it shows how to calculate them or whatever, but how easy is it to wire them up?

Replies:

Posted By: mobile1
Date Posted: April 06, 2004 at 1:26 AM

just run it in series with the wire you are connecting. and remember solder is better.

Posted By: hivolt
Date Posted: April 06, 2004 at 1:36 AM

What do you mean, run it in series? There is only one wire so I dont understand how you would rund the resistor with one wire, I wish there was some kind of diagram showing me the basic one wire resistor connection. Then I would understand. If anyone could draw a diagram for me real fast with the art program or something and send it to me at: hivolt2k2@aol.com it would be greatly appreciated.

Posted By: Velocity Motors
Date Posted: April 06, 2004 at 2:02 AM

Here's a better way to disarm without using the resistor for the Millenia:

To disarm with out unlocking, send a positive trigger to the blue / YELLOW key sense wire. The key sense wire is located at the steering column.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: bpm687
Date Posted: April 06, 2004 at 2:09 AM

Just cut the wire and splice the ends solder the wire onto the resistor same with the other side then shrink wrap or ele tape. Of course I could be wrong because I also am new to this

Print Page | Close Window