Print Page | Close Window

door lock setup for 95 protoge

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29872
Printed Date: July 26, 2025 at 11:23 AM


Topic: door lock setup for 95 protoge

Posted By: pvalenzuela
Subject: door lock setup for 95 protoge
Date Posted: April 07, 2004 at 12:28 AM

does anyone know how to set up the locks for an alarm on a 95 mazda protoge?

-------------
peter



Replies:

Posted By: profuse007
Date Posted: April 07, 2004 at 1:19 AM
|       POWER LOCK|GREEN / WHITE        |- |passenger kick panel        |
|     POWER UNLOCK|GREEN/ red           |- |passenger kick panel      

simply plug in the unlock/lck from teh alarm unit to those wire

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).



Posted By: pvalenzuela
Date Posted: April 10, 2004 at 12:03 AM
even if its a one wire system?

-------------
peter



Posted By: Javelin3o4
Date Posted: April 10, 2004 at 12:44 AM
techsoft doesnt show the protege as being a 1 wire locking system. What type of alarm is it? usually on a DEI type alarm you would use the light gauge blue/green wire for the lock/unlock.


Print Page | Close Window