Window Module with SPAL Window Kit
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30077
Printed Date: July 22, 2025 at 8:20 AM
Topic: Window Module with SPAL Window Kit
Posted By: Coomer
Subject: Window Module with SPAL Window Kit
Date Posted: April 09, 2004 at 8:36 PM
Hi,
On my '94 Celica, I have a SPAL deluxe power window kit installed. It works perfectly, and from each window motor, I have a blue wire and a black wire. These, along with +12volts and ground, go to each of the two window switches.
Today, I started installing a CL-200 power window module which has the following wires:
Blue - 1st Window Switch
Green - 1st Window Motor
Red - Fused +12 Volts
Black - Ground
Yellow - (-)Input From Alarm Brain
Blue/White - 2nd Window Switch
GREEN / WHITE - 2nd Window Motor
Yellow/White - To starter kill relay
Orange - (+)Input From Alarm Brain(Optional)
Now, since I have SPAL power windows in my car with a blue and black wire coming from each window motor, I'm not sure where the blue and green and blue/white and GREEN / WHITE wires from my module go.
Also, I currently don't have a starter kill relay, and so I'm not using the yellow/white wire. This shouldn't affect anything, right?
Replies:
Posted By: tjdurham
Date Posted: April 09, 2004 at 11:15 PM
your blue and green wires go to your drivers motor wires green to window motor same for passenger side you will just use the white striped in pass door cut the wire on your motor that tests 12volts in the up direction and install as above
-------------
tj
Posted By: Coomer
Date Posted: April 10, 2004 at 12:57 PM
I just tested the wires on the kit, and the black wires coming from the motors are the ones that give +12 volts when the windows are rolling up.
So the green and GREEN / WHITE wires will go to these black wires? If I do that, then where exactly will the blue and blue/white wires go?
-------------
Posted By: Coomer
Date Posted: April 10, 2004 at 9:59 PM
Thanks for the help TJ, I got it figured out and installed today.  -------------
|