Clifford 300 fuse keeps blowing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30106
Printed Date: July 22, 2025 at 5:53 AM

Topic: Clifford 300 fuse keeps blowing

Posted By: NiiAddy
Subject: Clifford 300 fuse keeps blowing
Date Posted: April 10, 2004 at 2:55 PM

Hi Guys

I have a concept 300 and the 5amp fuse for the alarm keeps blowing as soon as i put one in. I know there must be a short somewhere but dunno where to start. Is there another fuse somewhere that might have blown?

My biggest problems is i can't start the car because of the immobiliser and i need the car badly. Is there anyway of switching the alarm of so i can at least use the car.

Cheers

Replies:

Posted By: Velocity Motors
Date Posted: April 10, 2004 at 5:18 PM

Where does this 5 mp fuse wire into on the car ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: NiiAddy
Date Posted: April 10, 2004 at 11:34 PM

I don't know, its integral to the alarm

Print Page | Close Window