Negative armed output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30219
Printed Date: May 16, 2024 at 11:58 PM

Topic: Negative armed output

Posted By: bpm687
Subject: Negative armed output
Date Posted: April 12, 2004 at 1:46 AM

Does anyone know what to do with this wire. Its organe coming from the alarm brain and its orange and it says -NEG armed output Starter disable. Now what do I do with it do I just ground it or what?

Replies:

Posted By: CutDog504
Date Posted: April 12, 2004 at 1:53 AM

Hook it up to trigger a starter kill relay.

Posted By: bpm687
Date Posted: April 12, 2004 at 1:55 AM

Do I have to can I just use it for my window roll up module?

Posted By: bpm687
Date Posted: April 12, 2004 at 1:59 AM

And If I do use the starter kill do I have to make a relay like this and if so what does it mean by starter wire starter side and such

Posted By: profuse007
Date Posted: April 12, 2004 at 10:11 AM

you would cut the starter wire into two and one side will come from the key and one will come from teh starter.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: CutDog504
Date Posted: April 12, 2004 at 12:47 PM

Also, pin 86 is wrong. It should be 12 volt ignition. You actually can use a constant to wire it up, but in the past I've found that this causes dead batteries. Its much more reliable to wire it to an ignition wire, but make sure its an ignition wire that is hot during engine cranking also, or the relay wont work right.

Print Page | Close Window