toyota sequoia 03 windows wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30327
Printed Date: July 15, 2025 at 3:34 AM

Topic: toyota sequoia 03 windows wires

Posted By: rwidget
Subject: toyota sequoia 03 windows wires
Date Posted: April 13, 2004 at 6:49 PM

can anyone help me?

im trying to install 2 ( 2 window mods) for front and rear windows in an 03 sequoia with alarm activation to roll up windows and found that the drivers side control does not have motor wires connected to it. instead each door has a releay on the switch itself.

i probed the main control and could not find any wires that would respond to each switch being activated.

i took apart the main control and found ic's inside, so i think it could be type of control for each individual door.

can someone help with color of wires and polarity.

widget

-------------
123456

Replies:

Posted By: JWorm
Date Posted: April 13, 2004 at 7:55 PM

The info I have shows the Up wire being Red, and the Down wire being Green located at the switch in each door. So it looks like you'll have to run wires into each door.

Posted By: rwidget
Date Posted: April 14, 2004 at 12:05 PM

thats what i thought, but wasent sure.

1. will any window mod work on this car?

2. is there anything special i have to do

the car outputs 20 volt dc and im using 2 mas window mods.

-------------
123456