Power Windows Problem Intrepid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30390
Printed Date: June 19, 2025 at 1:38 AM

Topic: Power Windows Problem Intrepid

Posted By: tadziu2001
Subject: Power Windows Problem Intrepid
Date Posted: April 14, 2004 at 10:08 PM

Hello!

I have been trying to hook up power window rollup module in my intrepid. I have all the wires hooked up except the activation and the accesory. THe one that i am most concerned about is the activation. I want the windows to go up on alarm arm. I dont know where to hook it up to. I have a starter kill but the two wires that ground, they ground when i turn off the key. I dont know how to hook it up so when i turn the alarm on the windows go up. Thank you!!!

Replies:

Posted By: Velocity Motors
Date Posted: April 14, 2004 at 10:27 PM

The starter kill wire is the wire that your looking for. Most systems will (-) ground when armed, but this may also be a programmable option.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: CutDog504
Date Posted: April 15, 2004 at 12:33 AM

You'll wanna use the ground when armed wire (usually orange) and make sure you diode islolate it from the starter kill relay, otherwise the windows will roll up every time you turn off the ignition.

Print Page | Close Window