multimeter leads

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30506
Printed Date: May 28, 2024 at 9:29 AM

Topic: multimeter leads

Posted By: naughtydog
Subject: multimeter leads
Date Posted: April 16, 2004 at 6:05 PM

I am looking for multimeter leads that allow you to probe the wire easily. Here is a link to an image from the dei techbay
here is the link

Can anybody enlighten me

Naughtydog

Replies:

Posted By: mikep3
Date Posted: April 16, 2004 at 6:41 PM

Those look like scope probe leads. I'm not sure if they make them to fit into a multimeter but they might. Check your local electronics shop. Usually the ends of those are bnc connectors. You could probably make your own if you wanted.

Posted By: JWorm
Date Posted: April 16, 2004 at 9:40 PM

Tools trucks will have them.

A similar one that works very good is often called a 'bed of nails'.

You could try doing a google search on 'Pomona Electronics'. Its stamped on the probe you linked to.

Print Page | Close Window