So i want to install my own alarm and
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30522
Printed Date: July 21, 2025 at 2:51 PM
Topic: So i want to install my own alarm and
Posted By: osokrayzay
Subject: So i want to install my own alarm and
Date Posted: April 16, 2004 at 9:47 PM
So i want to install my own alarm. I have a viper 791 vx going into a dodge ram single cab. I have installed my own system in my truck which consists of a Kenwood 911 HU Jlaudio 1000/1 450/4 amps and 13w7 subwoofer.
I have found all the locations of the wires for the alarm but my mind just blanks out when it starts talking about relays and diodes and resistors. I have read the car security section in this site.
What i would like from you installers is more info on relay s and diodes. Bascially alarm installs guides.
I have tried to get it proffsionally installed but the shops are charging me $300 and up. I e-mailed an installer from the installer database that is from Vegas.
All i have is $150.The rest of the money is for bills rent,lunch you know. GAS!! omg the gas is expensive here $2.12 average 0_0.
Any help is appreciated.
Replies:
Posted By: MestizoRacer310
Date Posted: April 16, 2004 at 10:12 PM
Just goto DEI's website and get the wiring diagrams. I installed my Clifford 700IQ into my '91 Civic but the door lock function was messed up. However, everything else works fine. Needless to say I'm looking into a replacement. Anyway I hope this helps and let me know what happens....
Just another tidbit of info...this was my first alarm install too...I've done a few "basic" radio and amplifier installs and thought I wouldn't be able to do it...
-------------
Kevin
'02 Acura TL Type S & '98 Accord EX-L Sedan
Posted By: osokrayzay
Date Posted: April 17, 2004 at 12:41 PM
Ok cool.
When relays are asking for 12 volt constant fused. There is 4-5 relays asking for this same line. How? I cant tap into it, cuz ive read no to tap into the 12 volt line.
|