I have a 1990 chevy beretta with power door locks and would like to connect my alarm to operate my door locks and remote start. the alarm has both functions and i have the relays 2 do it with I dont know my cars wires to connect to for the door locks and the remote start where do i connect the relays for the door locks? where do i connect the relay for the remote start to the car ? I do know about fords but not chevy.
I have wire digrams for all makes of FORD 's but they do me no good with my chevy
-------------
HEAVY CHEVY
| 12V|red |+ |ignition harness |
| STARTER|yellow |+ |ignition harness |
| IGNITION|pink |+ |ignition harness |
| ACCESSORY|orange |+ |ignition harness |
| POWER LOCK|lt. blue |+ |either kick panel |
| POWER UNLOCK|black |+ |either kick panel |
| PARKING LIGHTS +|brown | |light switch |
| HEADLIGHTS|yellow |+ |light switch |
| DOOR TRIGGER|white |- |under dash light |
|TRNK/HTCH RELEASE|black |+ |release switch |
| TACHOMETER|PURPLE / white | |ignition module *1 |
| BRAKE WIRE|white |+ |brake switch |
| HORN TRIGGER|black |- |steering column |
| WIPERS|purple |+ |wiper switch |
| LF WINDOW UP/DN|dk.blu - brown |A |in drivers door |
| RF WINDOW UP/DN|dk.blu/wht - tan |A |in drivers door or dkp |
| LR WINDOW UP/DN|dk. grn - purple |A |in drivers door or dkp |
| RR WINDOW UP/DN|lt. grn - pur/wht |A |in drivers door or dkp |
Notes:
*1 Ignition module is rear of engine above trans-axle.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA