Giordon remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30659
Printed Date: April 28, 2024 at 11:34 PM

Topic: Giordon remote start

Posted By: nightShade
Subject: Giordon remote start
Date Posted: April 19, 2004 at 10:20 AM

Hey guys what's up? Yes, I'm revisting the Giordon 2-way alarm system again heh. I've got everything hooked up, but the remote start doesn't want to work. The turbo timer function works, so I know I have it hooked up right. I have the bypass module with transponder key. One thing though, I have a manual transmission, but I've actually sat in the car and tried to remote start it while pushing the clutch down to see if that was the problem, still a no go.

I made a video of what it's doing https://www.nightvisionsweb.com/remotestart.wmv

So far I have it hooked up as follows.

Yellow to start

Brown 1 to inigtion, brown 2 to ignition 2

blue to acc

violet to tach on engine.

posted_image

Any help would be appreciated, thanks!

Replies:

Posted By: nightShade
Date Posted: April 19, 2004 at 10:38 AM

Oh, I forgot to add, it's on a 98 accord with manual transmission. And when I try the remote start it doesn't even turn over, just flashes like in the movie.

Posted By: derek123
Date Posted: April 19, 2004 at 1:28 PM

The green light flashing.... is it in the shape of a key ?

If so your transponder bypass is messed up in some way.

Insert the key, but dont turn it, and try it again.

Posted By: nightShade
Date Posted: April 19, 2004 at 7:00 PM

Alright, so I figured out that it's something with the Alarm. I took a test probe to all the relays to the remote start and for some reason the security system doesn't send the signal for the starter. I saw a post about someone else having the same problemwith this system? Hopefully they'll see this post and help me out. :-/

Posted By: ywdb
Date Posted: April 21, 2004 at 12:24 AM

Hi nightShade,

Giordon alarm system has triple relay for remote start use. You can see the wire(yellow,brown,blue) and one white socket(3pin) connect to alarm system in this relay assembly.
These wire have (-) Output when remote start. So bypass module system ground wire connect to this "brown" wire.

This system must be push twice transmitter's remote start key when remote start.

Good luck!