Engine Starter for Honda Accord 91

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30728
Printed Date: June 13, 2024 at 6:31 PM

Topic: Engine Starter for Honda Accord 91

Posted By: amjadbokhari
Subject: Engine Starter for Honda Accord 91
Date Posted: April 20, 2004 at 10:16 AM

Hi Everyone

I just got Prostart CT-3300 Remote starter for my Honda Accord 1991, I am having problem, after all wiring the engine is not starting, instead it is give 5 paking lights flashes, does any body have complete wiring diagram, and also i need to know about Tach wire, where i have to connect it in engine (please give complete details), also where are the OEM alarm Disarm wire located ?

thanks for help

Javed

amjadbokhari@msn.com

-------------
asiacables

Replies:

Posted By: chasesaccessori
Date Posted: April 20, 2004 at 10:52 AM

<https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1990-93&make=Honda&model=Accord&ID=17955&type=Alarm>

-------------
(owner/installer)
Chase's Accessories
Ridgecrest, CA
in business since 92

Posted By: amjadbokhari
Date Posted: April 20, 2004 at 11:00 AM

-------------
asiacables

Posted By: amjadbokhari
Date Posted: April 20, 2004 at 11:00 AM

thanks but need some details

-------------
asiacables

Posted By: chasesaccessori
Date Posted: April 20, 2004 at 11:23 AM

Try this maybe

https://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/honaccord90-93.htm

-------------
(owner/installer)
Chase's Accessories
Ridgecrest, CA
in business since 92

Posted By: derek123
Date Posted: April 20, 2004 at 12:13 PM

5 flashes means you are attempting a remote start, and you havent programmed the tach signal to the module.

Posted By: amjadbokhari
Date Posted: April 20, 2004 at 1:52 PM

derek123 wrote:

5 flashes means you are attempting a remote start, and you havent programmed the tach signal to the module.

Thanks But i did program it, because remote door locks are working

-------------
asiacables

Posted By: amjadbokhari
Date Posted: April 20, 2004 at 1:53 PM

[QUOTE=chasesaccessori]Try this maybe

https://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/honaccord90-93.htm[/QUOTE]

Thanks, but same diagram

-------------
asiacables

Posted By: derek123
Date Posted: April 20, 2004 at 2:33 PM

locks work because you coded the remote to the module.

5 flashes when you press start: tach not programmed to the module. <- this is how the module 'knows' the vehicle has started, and when to relase the start wire during a start attempt. Were you hoping the module would just know when your vehicle was started ? read >

from the prostart.ca web site:

page 5 in the gray note box.

https://206.47.191.115/assemblyPDF.nsf/view-AllPDF/CT-3300_ig_en_h310s320v200_040312.pdf/$file/CT-3300_ig_en_h310s320v200_040312.pdf?openelement

Posted By: robbie2883
Date Posted: April 20, 2004 at 9:42 PM

run the purple wire from your alarm to the engine compartment and hook it to the blue wire coming out of your distributor cap. without this wire being hooked up your remote start will never start....no matter what

-------------
if its jammed force it - if it breaks in the process it needed to be fixed anyway
posted_image

Posted By: amjadbokhari
Date Posted: April 21, 2004 at 12:24 AM

Thanks to every one who replied to this post, the problem has been solved,

once again thanks for nice response.

AMJAD JAVED

-------------
asiacables