Print Page | Close Window

Reprogramming remote on my Ungo MS3001

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3079
Printed Date: May 19, 2024 at 8:19 PM


Topic: Reprogramming remote on my Ungo MS3001

Posted By: Don Chi Chi
Subject: Reprogramming remote on my Ungo MS3001
Date Posted: August 26, 2002 at 11:26 AM

Can anyone fill me in on how to program my remote on my Ungo alarm?  I erased it.




Replies:

Posted By: enuro12
Date Posted: August 26, 2002 at 12:56 PM
A model # would be a great help......

-------------
Chuck,
tech junky



Posted By: Don Chi Chi
Date Posted: August 26, 2002 at 4:40 PM

Hi.

What other model # is needed?  I stated it was a MS3001 in the subject, is there something else to denote the model?




Posted By: hot_shot_guy123
Date Posted: August 26, 2002 at 6:01 PM
Um I have had UNGO alarms but not that one.  To program the remote was the same way for every UNGO that I owned.  Put the ignition key in the "ON" position, Hold the Valet switch.  While holding the valet switch press and hold the "ARM" button.  After a few seconds you should hear three chirps indicating that the remote has been added.  Give this a shot and let me know the outcome.

-------------
"Light travels faster then sound, that's why some people seem bright until you hear them speak."
hot_shot_guy123


Print Page | Close Window