dual stage shock sensor wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30875
Printed Date: May 19, 2025 at 2:12 AM

Topic: dual stage shock sensor wiring

Posted By: davidwp13
Subject: dual stage shock sensor wiring
Date Posted: April 22, 2004 at 8:26 PM

Hi I am installing my first alarm and with help from some of you people I have been sucessfull and NOT fried anything. I have one last task, I do not understand how they want me to connect the Stinger dual stage shock sensor??? It says I should cut a wire and then hook it in to the " door sensors "?? I am not clear on this ,,it sure does NOT sound rigtt...

HELPPP

-------------
David

Replies:

Posted By: draasch
Date Posted: April 23, 2004 at 8:37 AM

most of then just plug right into the alarm module...what are you using??

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Big Dog
Date Posted: April 23, 2004 at 8:47 AM

Hey davidwp13,
Like draasch says, what alarm model do you have?
Stinger dual stage impact is a DEI product and if you bought the whole thing in a box then there is a port on the alarm module where this simply plugs in.
If the alarm isn't a DEI then see if it has a "multiplex" input and twist the blue and green wires of the impact sensor together and connect them there.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: davidwp13
Date Posted: April 23, 2004 at 6:32 PM

Hi thanks for responding I am installing a Python 660XP with the dual stage shock sensor ( stinger directed daul stage ) The inst. are vague but it says to cut a wire and hook the the green mutiplex and then something about the blue

-------------
David

Print Page | Close Window