Need help with Valet 561T
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30940
Printed Date: September 20, 2025 at 4:56 AM
Topic: Need help with Valet 561T
Posted By: zippymbr
Subject: Need help with Valet 561T
Date Posted: April 23, 2004 at 11:13 PM
Hello to all, this is my first post. I have installed two alarms before and have never had a problem. I am installing the Valet 561T onto my 2002 Odyssey. I think I have installed all the needed wires and now I need to program the unit to my factory remote. I have no idea how to do this. Ther are no instructions in the install manual, and I have searched this forum to no avail. Please enlighten me, I feel like an idiot.
Replies:
Posted By: zippymbr
Date Posted: April 24, 2004 at 9:20 PM
I found my problem. I do not have the activation input hooked up properly. I know that the remote start works because if i give the H1/6 wire 2 pulses the van starts right up. I have not been able to find the right wire to hook the activation input wire up to. Any help please?
Posted By: profuse007
Date Posted: April 24, 2004 at 10:55 PM
are you trying to hook up this RS add-on to a stock alarm or an aftermarket?
if its hook to the stock alarm, then use the doorlock wire from teh car w/ a diode and a relay. a diode is use to keep the manual lock/unlock button from starting it.
if its hook to the aftermarket alarm then find an AUX wire.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: zippymbr
Date Posted: April 24, 2004 at 11:31 PM
Yes it is a remote start add on. Can you give me a diagram of what it should look like? The pic in the manual showes it hooked up to a momentary switch.
|