Power Door lock installation F150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30948
Printed Date: September 19, 2025 at 11:11 PM

Topic: Power Door lock installation F150

Posted By: samrio
Subject: Power Door lock installation F150
Date Posted: April 24, 2004 at 10:40 AM

Having trouble installing an aftermarket Power Door lock kit to my Ford F-150. Got my door panel off, but don't have much room to work with. Was wondering if anyone knows where or how to install the aftermarket gun style door actuators to an 03 or similar Ford F150.

Thanks.

Replies:

Posted By: draasch
Date Posted: April 24, 2004 at 8:31 PM

see if you have enough room below the latch. i think there is a hole on the latch for the rod on the motor. you can use the plastic clips made for ford to hold the rod in place....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: ranquist
Date Posted: April 26, 2004 at 7:47 PM

Hi, you are trying to mount this inside the door panel and not inbetween the plastic panel and the meatal?

Posted By: samrio
Date Posted: April 26, 2004 at 9:03 PM

Yup. I'm looking for a good spot and perfect way to get the actuators and the rod to fit in place. The panel doesn't allot for enough room for the actuators to be attached in between. I can't find any tutorials for installing power locks on a manual lock door for an F-150.

Print Page | Close Window