Impulse Security 4040 Diagrams

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31049
Printed Date: May 03, 2024 at 7:38 AM

Topic: Impulse Security 4040 Diagrams

Posted By: feuser
Subject: Impulse Security 4040 Diagrams
Date Posted: April 26, 2004 at 10:06 AM

I have a IMP 4040 Alarm/Starter (similar to Vampire 4040 or Commando?) and seem to have lost the user and installation manual. Could someone point me to a good source online or perhaps post his/her copy?

Replies:

Posted By: Basscoholic23
Date Posted: April 26, 2004 at 8:53 PM

Heavy gauge wires

(2)red-CONSTANT BATTERY

BROWN-IGN 1

YELLOW-IGN 2

ORANGE-ACC

PURPLE-STARTER

Small gauge wires

WHITE -PARKING LIGHT OUTPUT

BLACK-GROUND

YELLOW-BRAKE (+)INPUT

ORANGE-(-)WHEN ARMED

BLUE-(-)INSTANT TRIGGER/SHUTDOWN

PURPLE-(+) DOOR TRIGGER

GREEN-(-) DOOR TRIGGER

RED -CONSTANT (+)

BROWN-(+)SIREN OUTPUT

GRAY-TACH

all this info is off my head and have the manual at the shop ,will give you the rest of the wire info 2morrow.hope this help you out some. posted_image

Posted By: feuser
Date Posted: April 27, 2004 at 10:07 AM

Thanks very much!

I don't remember if the install manual says to connect each of the fused red leads to different power sources.

Also, if you have any reference as to the programming of the features (auto-lock/arm etc.) - any help would be appreciated.

posted_image

Posted By: johnd325
Date Posted: June 22, 2004 at 1:24 PM

Hi, I'm looking for the programming functions too.

Thanks,

John

Print Page | Close Window