Print Page | Close Window

Permanently Disarm OEM alarm Mitsu Eclips

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31103
Printed Date: July 15, 2025 at 2:52 PM


Topic: Permanently Disarm OEM alarm Mitsu Eclips

Posted By: civic619
Subject: Permanently Disarm OEM alarm Mitsu Eclips
Date Posted: April 27, 2004 at 2:47 AM

I have a 1995 Eclipse that has a factory alarm.  I am about to put in an aftermarket alarm by Viper.  Does anyone know how to disable the factory alarm? Is there a wire I have to ground out in order to keep the OEM alarm disarmed????

Any Help Please?




Replies:

Posted By: ranquist
Date Posted: April 27, 2004 at 7:41 AM
GREEN / WHITE drivers kick panel (-)



Posted By: civic619
Date Posted: April 27, 2004 at 9:19 AM
Do I just cut that wire???



Posted By: Velocity Motors
Date Posted: April 27, 2004 at 9:24 AM

No, take a jumper wire ( just a small piece of wire ) and attach one end to ground and the other end to the GREEN / WHITE wire. When the ground touches the GREEN / WHITE wire it will disarm the OEM security. If the jumper wire is removed, then the OEM DIARM is not engaged and will arm like normal again. If you want to retain the OEM security and have the Viper alarm control the OEM security, you can attach the OEM DISARM wire from the Viper to this wire instead and still retain all OEM functions + have the Viper system as well.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window