How to change Beeping mode to Vibrating?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31245
Printed Date: May 15, 2025 at 10:00 PM

Topic: How to change Beeping mode to Vibrating?

Posted By: MR. W
Subject: How to change Beeping mode to Vibrating?
Date Posted: April 28, 2004 at 11:01 PM

Hey! I have a VIPER 790 XV 2 WAY ALARM SYSTEM W/START INSTALLED

Alerts users to security
system triggers by Beeping
or Vibrating!

How to change from Beeping mode to Vibrating mode?

I do not have my owner's manual, so if anyone can post instructions on relearning my remote to my brain, that would be great. THANKS!

Replies:

Posted By: profuse007
Date Posted: April 28, 2004 at 11:56 PM

hold down all four buttons simultaneously, once youre in the programmin mode.... i think press the siren/panic button to toggle to diff indication mode.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Print Page | Close Window