95 maxima factory security

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31271
Printed Date: April 30, 2024 at 12:36 AM

Topic: 95 maxima factory security

Posted By: rovingtek
Subject: 95 maxima factory security
Date Posted: April 29, 2004 at 11:13 AM

I want to install an aftermaket alarm system, but I was told that the factory sec sys has to be bypassed.
What's involved???

Thanks

Replies:

Posted By: eurotech
Date Posted: April 29, 2004 at 12:43 PM

If your just adding an alarm, there is nothing special that you have to do. the factory alarm arms with lock and disarms with unlock. So as long as you hook your power doorlocks up on the alarm...you should be fine!

Posted By: rovingtek
Date Posted: April 29, 2004 at 12:54 PM

Thanks eurotech, but the problem is that I don't have the remotes and it seems to be armed now. Iwas told that it can be reset by unhooking the battery for a few and reconnecting, but every time the door gets unlocked it will arm again.

Posted By: eurotech
Date Posted: April 30, 2004 at 1:10 PM

It arms everytime it unlocks? hmm....are you sure you are just dealing with the factory alarm? What happens when the alarm goes off? Does it disarm when you unlock the door with the key?

Print Page | Close Window