1989 Honda Accord Lxi remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31360
Printed Date: July 15, 2025 at 2:59 PM

Topic: 1989 Honda Accord Lxi remote start

Posted By: MDI2001
Subject: 1989 Honda Accord Lxi remote start
Date Posted: April 30, 2004 at 9:36 PM

I have a 1989 Honda Accord Lxi. The alarm is a AlphaGuard AG65S. My only problem is when i remote start the car grinds when i stick the key in ON and CRANK.
Now with out the anti-grind relay they gave me. The remote starter works fine, with no grinding. But I am not able to start my car with just the key, only remote start. So my relay is not getting a ground to kill the starter wire for some reason. For a tach sense wire on this alarm it says to use the oil sensor. But i used the ignition coil blue wire instead, could this be causing the problem?

Replies:

Posted By: draasch
Date Posted: April 30, 2004 at 10:15 PM

you are the second person to have problems with that unit.....the first one was with the door locks....tech support will not return e-mails......i dont know that anyone one here uses that brand......

if you are able to post the install manual, we might be able to help you...
good luck.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: MDI2001
Date Posted: May 01, 2004 at 8:24 PM

Hi, I have a 1989 Honda Accord LXi with a AlphaGuard AGS65.

My problem is after i remote start, when I stick the key in to ACC or Crank the starter will grind since it is running. I hooked the anti-grind relay that the alarm gave me correctly and it still does this. I am thinking that the negative alarm output that is hooked up to the relay is not working correctly, if I put a constant ground to this same wire on the relay it kills the starter wire so it will not grind. Then I can only remote start, not able to start by key alone.

Also the alarm only has a hook ups for central door locks. I have 2 wire door lock acuators. Is there any way i can hook these up to this alarm and how?

Here is the instructions