Print Page | Close Window

Concept 300 Accessory Wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31520
Printed Date: July 21, 2025 at 4:01 PM


Topic: Concept 300 Accessory Wiring

Posted By: graemesimpson
Subject: Concept 300 Accessory Wiring
Date Posted: May 03, 2004 at 10:55 AM

Hi Guys,

Was hoping someone might be able to advise me on the following:

I have a Clifford Concept 300 Installed, I have the Aux/Accessory wire and I need to hook up a remote boot solonoid.  I realise I have to connect everything up through a relay but don't know what needs to go where, etc.

Any advise would be gratefully appreciated.

Graeme




Replies:

Posted By: Velocity Motors
Date Posted: May 03, 2004 at 11:03 AM
If the AUX wire is a (-) output and the boot solenoid is a (+) trigger use this: https://www.velocitymotorsport.com/images/install_notes/N2P.jpg

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window