what model remote start is this?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31571
Printed Date: May 14, 2024 at 9:00 AM
Topic: what model remote start is this?
Posted By: dark_knight
Subject: what model remote start is this?
Date Posted: May 04, 2004 at 10:32 AM
here are a couple pics for it, im not sure, i think it may be a commando, but i dont know what model, im trying to fiugure out how to turn on the option to use the lock/unlock feature, its disabled, so i need to know what model to know the codes.....thanks https://home.cogeco.ca/~j_basham/module.jpg https://home.cogeco.ca/~j_basham/transmitter.jpg
Replies:
Posted By: bmf1000d
Date Posted: May 04, 2004 at 12:55 PM
If there is FCC number on it you can check that on here https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/GenericSearch.cfm------------- "Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof
Posted By: dark_knight
Date Posted: May 05, 2004 at 7:03 PM
damn, no fcc number on it :( and no replys yet, so im assuming that no one recognizes it
Posted By: lspker
Date Posted: May 05, 2004 at 8:33 PM
Looks like a Toucan TR-3, the doorlocks should be active on door lock output wires. The programming would be for pulse leangth, or ignition locks.
Posted By: jrilla
Date Posted: May 05, 2004 at 10:12 PM
There are very few programmable options for that unit. The door locks are not one of those options. there is a three pin connector as you can see from the diagram on the back that is for the door lock outputs. They are (-) outputs only and they may not even be hooked up. What vehicle do you have? If you have negative door locks you may be able to just hook up the wires directly. If not, then you will need relays.
------------- J Rilla
Owner/Installer
Posted By: dark_knight
Date Posted: May 06, 2004 at 7:06 AM
1990 ford aerostar.. i do believe they are positve locks.....
Posted By: sroth140
Date Posted: May 06, 2004 at 1:52 PM
if its a (+) trigger vehicle just use relays off of the brains (-) lock signals.
------------- MECP certified installer
Posted By: dark_knight
Date Posted: May 06, 2004 at 8:05 PM
got a link to the page that explains that? sorry to ask
Posted By: golfnut64
Date Posted: May 07, 2004 at 8:33 AM
The transmitter looks like an Amenity ProStart 2300 check www.spal-usa.com
------------- Lloyd
Posted By: jaurora
Date Posted: May 07, 2004 at 3:11 PM
If
------------- MECP certified (If it really means anything)
Jeremy
Posted By: jaurora
Date Posted: May 07, 2004 at 3:12 PM
If I had to guess I would say that
------------- MECP certified (If it really means anything)
Jeremy
Posted By: jaurora
Date Posted: May 07, 2004 at 3:12 PM
If I had to guess I would say that brain is mostlikly
------------- MECP certified (If it really means anything)
Jeremy
Posted By: jaurora
Date Posted: May 07, 2004 at 3:12 PM
If I had to guess I would say that brain is mostlikly an audiovox (prestige) APS***
------------- MECP certified (If it really means anything)
Jeremy
|