Adding OEM Keyless Entry, 1992 Olds 88
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31638
Printed Date: August 09, 2025 at 1:32 PM
Topic: Adding OEM Keyless Entry, 1992 Olds 88
Posted By: tressler
Subject: Adding OEM Keyless Entry, 1992 Olds 88
Date Posted: May 05, 2004 at 12:54 PM
Hello, I bought a GM keyless entry module with matching remotes on eBay. Does anyone know where I might locate the factory harness plug for the module? Or, is it even possible to add the module to a car that did not have factory keyless entry? From what I researched, this module should work with most all GM's that had factory power locks, which mine has. But, I cannot locate the harness plug. Thanks.
Replies:
Posted By: jrilla
Date Posted: May 05, 2004 at 10:37 PM
This is just my first thought on the idea, so i could very well be wrong. I doubt you can add keyless entry by just plugging in the unit, unless the car was at least designed to have keyless entry. Like I said I could be wrong, but for soem reason I doubt a 92 olds 88 was wired for that. i had a 97 old 88 with factory keyless and the keyless module was behind the glovebox and to the right of it. Thats 5 years difference though. Sorry if i am wrong by the way.
-------------
J Rilla
Owner/Installer
Posted By: tressler
Date Posted: May 06, 2004 at 8:13 AM
I found the installation location for the RAC near the PCM (behind the glove box), but, I cannot locate the harness plug for it. This car definately has the provisions for this, I've located the section in the service manual for it, and found the installation location. Any ideas on where the plug may be tucked away? I can't imagine GM having a different wiring harness for a car without remote locks. Thanks
|