Replacing the battery in alarm Remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31915
Printed Date: July 21, 2025 at 3:58 PM

Topic: Replacing the battery in alarm Remote

Posted By: djrock
Subject: Replacing the battery in alarm Remote
Date Posted: May 10, 2004 at 12:13 PM

Hello Is there a special way of replacing the battery in a L reg 93/94 Land Rover alarm remote control? I have heard that after the battery has been changed you need to press the arm/dis-arm button so many times to set it up or to stay close to the vehicle?

Thankyou

djrock

Replies:

Posted By: jaurora
Date Posted: May 10, 2004 at 1:40 PM

The remote should already be programed. Just either pop the controller apart or unscrew it and replace the battery. I have never heard of reprogramming a remote after changeing the battery.

-------------
MECP certified (If it really means anything)
Jeremy

Posted By: djrock
Date Posted: May 10, 2004 at 3:43 PM

I was not sure. You know how some car makers alarms can be funny that you have to do a specific thing or your locked out and have to go back to a specialist.

Thankyou

Print Page | Close Window