L.E.D. light install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32106
Printed Date: May 10, 2025 at 11:04 PM

Topic: L.E.D. light install

Posted By: Homicyde
Subject: L.E.D. light install
Date Posted: May 13, 2004 at 3:39 PM

can you tell me how to wire an LED light to flash when the ignition is turned off in a vehicle that has no alarm? I have an LED from an alarm system that i will be using.

Replies:

Posted By: hawkinstaller02
Date Posted: May 13, 2004 at 3:45 PM

1) wire one side of led to ground

2) get a relay

3)85- to ingition

86- to ground

87a- fused 12v (5A is plenty, prob ok w/ 1A)

30-output to led

87- nothing

That should do it.

-------------
Did that work???????
-Installer-

Posted By: hawkinstaller02
Date Posted: May 13, 2004 at 6:09 PM

good point

-------------
Did that work???????
-Installer-

Posted By: ratherlargeben
Date Posted: May 13, 2004 at 11:27 PM

do that with a 'flashing LED' from radio shack and It'll work

Print Page | Close Window