Help with Rattler 369D

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32126
Printed Date: May 10, 2025 at 8:57 PM

Topic: Help with Rattler 369D

Posted By: rnd4eva
Subject: Help with Rattler 369D
Date Posted: May 13, 2004 at 9:33 PM

I connected all teh ignition wires but have no idea on how to incorporate the door locks. The unit comes with a relay and a thing of three wires but I can't figure out which wire from the unit to use. It says to use the main harness wires (light green, and light blue)but I can;t find those wires on the main harness. Please help me and explain how I can install this in detail and anything else I should know. The only wires I connected on the 9 pin harness are the white with a fuse and the ground. Please give me a detailed explanation. Thank YOU SOOO MUCH!

Replies:

Posted By: profuse007
Date Posted: May 14, 2004 at 12:46 AM

i think this is just a standalone RS unit w/o alarm nor keyless entry. if it has keyless entry, the kit will come w/ a two wire harness, blue and green.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: chriswallace187
Date Posted: May 14, 2004 at 1:57 AM

For the door locks you will use the relay which plugs into the 3-pin harness(blue, red, and green wires). The relay wiring will depend on the type of locking system. What kind of vehicle are you doing the install on?

Posted By: evolutionoftym
Date Posted: May 15, 2004 at 8:30 PM

The 369D does have doorlocks you just need to (depending on vechicle) us these the green and blue for negative D. locks or use the dei 451m (which should have been supplied) for positive

-------------