1996 ford crown vic lock wires?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32180
Printed Date: May 16, 2025 at 3:24 PM

Topic: 1996 ford crown vic lock wires?

Posted By: p71-cruiser
Subject: 1996 ford crown vic lock wires?
Date Posted: May 14, 2004 at 11:46 PM

I have a 1996 ford crown vic and I need or would like to find the power door lock wires for lock and unlock I have many different wiring digrams that tell me where to fing em but i don't have any luck finding them.

pink & yellow and pink & lt green inside drivers kick panel or behind the glove box or also the pass kick panel I tried with no luck. Am I missing something here?? They are big wires too right??

Thanks in advance

Replies:

Posted By: p71-cruiser
Date Posted: May 14, 2004 at 11:57 PM

sorry my keyboard is not working right with the spelling posted_image

Posted By: p71-cruiser
Date Posted: May 15, 2004 at 10:22 AM

jump up

Posted By: DBFORDTECH
Date Posted: May 15, 2004 at 10:25 AM

You colours are correct if the car has factory keyless entry.

The wires are actually quite small.

Posted By: p71-cruiser
Date Posted: May 15, 2004 at 11:30 AM

ok it doesn't have keyless.

so what would the colors be then??

Thank you so much

Posted By: auex
Date Posted: May 15, 2004 at 2:39 PM

It is the same color either way, factory keyless or not. Look in the driver's kickpanel in the harness running into the door. They are in this harness. If you have to you can get the wires in the door boot. If it didn't come with factory keyless then it is 5 wire, if it did come with factory keyless then it is +trigger.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: p71-cruiser
Date Posted: May 16, 2004 at 2:51 AM

I don't what a 5 wire means but I did some testing and found that pink and like a yellow color your maybe orange and pink and black works for the unlock and lock I hope this is okay to use I don't see why not??

Thanks

Posted By: p71-cruiser
Date Posted: May 16, 2004 at 1:24 PM

LOL

Do you have an idea what a 5 wire system is?? Do I tie into all of the 5 wires for lock and unlock???

Thanks

Posted By: auex
Date Posted: May 16, 2004 at 9:42 PM

It is also known as reverse polarity locks. Here is a diagram for relays that you will need.
posted_image

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: p71-cruiser
Date Posted: May 16, 2004 at 11:46 PM

Thank you I'll try em out tomorrow.

Posted By: p71-cruiser
Date Posted: May 17, 2004 at 11:47 AM

Ok well I tried that system and didn't work it blew a 30 amper fuse. So now I'm really confused. I have found the pink and lt green wire and the pink and yellow wires this is what i have used to try this relay system above and that's when it blew the 30 amp fuse.Only thing now that I can think of is that I need to go into the driver's door side and not where I'm tried into now which is right behind the glove box. Anyone agree on this? I really don't see a difference but who knows.

Thanks a lot for your help

Why can't this be a hot topic posted_image

LOL