Print Page | Close Window

Retained Accessory

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32342
Printed Date: May 15, 2024 at 7:27 PM


Topic: Retained Accessory

Posted By: hawkinstaller02
Subject: Retained Accessory
Date Posted: May 18, 2004 at 12:38 PM

anyone know how to add a retained acc. for radio to remain on until the dor opens????????????



-------------
Did that work???????
-Installer-



Replies:

Posted By: profuse007
Date Posted: May 18, 2004 at 1:57 PM
If you wish to keep the radio (or any other device that is powered by an accessory circuit) on until a door is opened, you can do so by creating a latch when the accessory is turned on with the relay shown below on the left, then breaking ground to the latch when a door is opened as shown with the relay below on the right. While this will keep the radio on, the entire accessory circuit will see 12V+ until a door is opened with the key in the off position.(the12volt.com @ relay section)
posted_image

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: WillTS
Date Posted: May 18, 2004 at 5:38 PM
Would you be able to use a diode between the radio and the rest of the vehicle wiring to keep the juce from flowing to the rest of the accessories?
Will





Print Page | Close Window