programming remotes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3237
Printed Date: May 05, 2025 at 7:53 PM

Topic: programming remotes

Posted By: scooby25
Subject: programming remotes
Date Posted: September 01, 2002 at 9:29 AM

does any one no how to reprogram remotes for a crimestopper cs-2009-1.thanks

Replies:

Posted By: scooby25
Date Posted: September 01, 2002 at 4:30 PM

I left my main alrm fuse out last night while working on power trunk release and when i hooked everything back up the remotes would not work and my installatoin manual is locked up at work.I would really like to see if the trunk release works so if any one knows how to reprogram Id really apprciate it .thanks

Posted By: scooby25
Date Posted: September 04, 2002 at 7:21 PM

OK I still cannot get the remotes to program does anyone have any ideas on what could be wrong or am i programming it wrong, on/off on/off on wait two seconds press the valet switch should chirp 4 times (it does) and then hit arm/disarm button twice should chirp to confirm( it dosent) is this correct?

Posted By: the12volt
Date Posted: September 04, 2002 at 7:46 PM

Hi scooby25, try calling Crimestopper at 800.998.6880 between 9 and 5 PST.

Posted By: scooby25
Date Posted: September 05, 2002 at 4:20 PM

thanks,but do you have any other suggetions ,I left a message on wed. and they still have not called me back.

Print Page | Close Window