Python 625 HF

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32484
Printed Date: May 31, 2024 at 6:36 PM

Topic: Python 625 HF

Posted By: mike ryan
Subject: Python 625 HF
Date Posted: May 21, 2004 at 1:10 AM

Hi,

I just installed the python 625 HF on my 1991 Acura Integra. Sometimes, there is no problem, but the first few times I tried to start the car, there was a thud and everything died for about three minutes. While this hasn't happened in a while, if often struggles to start, especially if the alarm has gone off. I have left the light on all night (ooops...) and it hasn't had a problem and I've had the battery tested. Any suggestions?

Thanks,

Michael

P.S. If any of you can point me to a good description of how to mount the shock sensor to be more sensitive before I find one, I'd appreciate it.

Replies:

Posted By: Velocity Motors
Date Posted: May 21, 2004 at 9:02 AM

Does the Integra start good with the key or is it rough like the remote start ? The car dying is not a good thing and this sounds like a loose connection at the battery terminal or at the ignition switch .

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mike ryan
Date Posted: May 21, 2004 at 11:21 AM

Well, I don't have a remote start hooked up, but the battery cable may have been loose when the car died. I was unhooking the battery before cutting into wires and wasn't tightening the bolt when I tested it, only after I finished. it is definatly tight now though.

Thanks