Start Button Install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32496
Printed Date: May 24, 2024 at 2:57 PM

Topic: Start Button Install

Posted By: SPYDERGIRL
Subject: Start Button Install
Date Posted: May 21, 2004 at 9:30 AM

I just bought an S2000 Start button to install to my MR2 Spyder. I have a few sites that I found diagrams for, but I was wondering if anyone has made the attempt to install one. Easy? Hard? It doesn't look too difficult, but I was searching for some feedback. Here are some helpful sites that I have found.

https://https://www.miata.net/garage/pushstart/

https://https://www.clubcivicquebec.com/site/technical/Cosmetic/004.html

https://www.scuderiaciriani.com/rx7/start_button_installation.html

https://performance.clubrsx.com/instructions/S2000starter.pdf

https://https://members.shaw.ca/banana_bread/S2000DIY/s2000enginestartdiy.htm

Replies:

Posted By: veneficus
Date Posted: May 25, 2004 at 10:36 AM

havent installed exactly the same thing, but ive done some custom toying around with starter/ignition systems. the difficult part is making sure you have the right wires, not cutting the wrong ones or splicing stuff wrong. a very wise choice would be to get the repair manual for your specific car, so as to be able to double check wire colors and where they all go.

-------------
Chris
StreetFX

Posted By: Velocity Motors
Date Posted: May 25, 2004 at 11:33 AM

Just make sure that you use the proper gauge wires for the starter wire. Here's a diagram that I have for wiring up the relay: https://www.velocitymotorsport.com/images/install_notes/156.jpg The installation is very easy and requires little or no modifications to the car.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA