Multiple LED’s with an Audiovox APS-996a

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32503
Printed Date: May 16, 2024 at 4:49 AM

Topic: Multiple LED’s with an Audiovox APS-996a

Posted By: Cptbrainiac
Subject: Multiple LED’s with an Audiovox APS-996a
Date Posted: May 21, 2004 at 10:47 AM

Hi,

Was wondering if anyone had any experience installing multiple LED's with a 996a.

I'd like to be able to add two (or four) additional LED's to my 996a (for the doors). These would be simple flush mount, flat top LED's; similar to the DEI 622T.

Any help would be appreicated.

Thanks.

-------------
Bill

Replies:

Posted By: WillTS
Date Posted: May 21, 2004 at 11:19 AM

Never done it on an alarm, but on computers I have messed around with them. It should be no problem as long as you wire them in series. And they hardly use any power, so four of them should be no problem.

-------------
Will Just my $00.02
97 Chevy K1500 5.7L w/ Clifford Matrix RS2
BTW I am not a professional(well at procrastination maybe)
Be Gentle, I'm new to this :-)

Posted By: CutDog504
Date Posted: May 21, 2004 at 3:33 PM

Yeah, just be sure that they are wired in series. I've seen ppl put up to 8 leds wired in series. But be careful, if you dont wire them in series you can fry the led output on your alarm brain.

Print Page | Close Window