Door wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32578
Printed Date: July 12, 2025 at 8:00 PM

Topic: Door wiring

Posted By: Lubrano
Subject: Door wiring
Date Posted: May 22, 2004 at 9:37 PM

I need to get wires from the brain of the 591XV unit to the memory seat buttons located in the door. This is a 99 Jeep Grand Cherokee. What is best method to get the wires from the cabin to the door? These jeeps have a plug I believe called a molex plug that connects the door wiring to the cabin. Any suggestions will be a great help.

Sal

Replies:

Posted By: draasch
Date Posted: May 22, 2004 at 10:20 PM

just take a peek at it ans see if there is a way to fish it through..........

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Lubrano
Date Posted: May 22, 2004 at 10:24 PM

No. It is almost impossible. This plug has a male and female connection which can be seperated and is completly sealed on the outsides.

Posted By: draasch
Date Posted: May 22, 2004 at 11:01 PM

where is a will, there is a way........

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: tarix
Date Posted: May 23, 2004 at 3:35 AM

I think what draasch meant is:

Where there is a drill there is a way. ;)

Posted By: Lubrano
Date Posted: May 23, 2004 at 10:13 AM

If I make two holes one in the door and one in the cabin is there a way to make the wires look professional. Wires passing through looks horrible!

Posted By: Lubrano
Date Posted: May 23, 2004 at 10:14 AM

If I make two holes one in the door and one in the cabin is there a way to make the wires look professional. Maybe even a plug that can be disconnected like the factory ? Where can Ipurchase something like that? Wires passing through looks horrible!

Posted By: ohio420jb
Date Posted: May 23, 2004 at 10:31 AM

couldnt you just cut into them at the kick panel? or follow the fatory wiring through the door?

Print Page | Close Window