Print Page | Close Window

keypad removal

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32581
Printed Date: July 13, 2025 at 1:45 PM


Topic: keypad removal

Posted By: scrib2s
Subject: keypad removal
Date Posted: May 22, 2004 at 10:46 PM

to start my truck, 1990 toyota pickup, i have to type in a code on a keypad before it will turn over, i want to remove it but dont kno how, when i lloked at it the keypad connects to a small black box, and out of the box there is several wires that come out and go to ignition and other places. i was told that the it interupts the wire from the ignition to the soleniod im not sure what im have to do to find  and connect the wires to get rid of the keypad. any advise to help me figure out how this works or just simply what i need to do to remove it will be appreciated.




Replies:

Posted By: draasch
Date Posted: May 22, 2004 at 10:54 PM
you should be able to trace the wires from the unit to the connection point....if you find any wires that were cut in two, reconnect them and that should take care of everything...

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window