doorlock info. for viper350hv
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32628
Printed Date: April 28, 2024 at 4:27 PM
Topic: doorlock info. for viper350hv
Posted By: gcorrea
Subject: doorlock info. for viper350hv
Date Posted: May 23, 2004 at 10:16 PM
i'm going to update my alarm to the viper 350hv. my question is this, the two wire harnes that comes with the alarm for the doorlocks has a lock and unlock trigger. i need 12 volts for my relays, is the center prong on the brain 12 volt constant? should i run a seperate 12 volt wire to my relays? and if the prong does have 12 volts does viper sell a three wire harnnes. any info is greatly appreciated.
-------------
gcorrea
Replies:
Posted By: 13 volts
Date Posted: May 24, 2004 at 12:08 AM
Run a new wire of 12 volts FUSED to your realys
Posted By: raydawg357
Date Posted: May 24, 2004 at 7:55 AM
What type of vehicle do you have? Many newer alarms come with onboard relays so you may not need the seperate relays
-------------
Do it right the first time
Posted By: gcorrea
Date Posted: May 26, 2004 at 10:35 PM
it's a 1988 chevy silverado, i'm using a k-9 atv alarm which i'm swapping for the viper. the k-9 has the plug in harnness that carries the lock and unlock wires plus the 12 volt constant. just wondering if the viper does too, since it also has the lock and unlock wires plus the third prong that i can't test since the alarm is not wired in yet. just wondering if anybody knows if it does carry 12 volts costant, and if viper carries a three wire harnes since the alarm came with the two wire one. thanksl.
-------------
gcorrea
Posted By: draasch
Date Posted: May 26, 2004 at 11:09 PM
if it has the same set up, use a DLS from omega... ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: gcorrea
Date Posted: May 26, 2004 at 11:26 PM
thats what i was thinking of doing, but the omega harness wont fit the viper.
-------------
gcorrea
|