1999 Chrysler Intrepid Remote Start Install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=327
Printed Date: August 18, 2025 at 11:12 PM

Topic: 1999 Chrysler Intrepid Remote Start Install

Posted By: GeoP
Subject: 1999 Chrysler Intrepid Remote Start Install
Date Posted: April 14, 2002 at 12:11 PM

I am having trouble understanding the interface to:

Power Door Locks (620 and 2700 ohm resistors) and the Parking Light Flash(park lights energized by a fac relay and 44-49ohm resistance in the headlight/BCM circuit). Do I have to hook-up with resistors and relays or can I take the negative output pulse directly to the factory relay(s) ground side of coil?

Replies:

Posted By: Velocity Motors
Date Posted: April 14, 2002 at 9:25 PM

You will have to hook up both the relays and the resistors to make the keyless entry work properly:

Doorlock diagram: https://www.bulldogsecurity.com/wires/images/chrysler1wirecars.htm

Parking Light :https://www.bulldogsecurity.com/wires/images/dodgeintreplight.htm

If you need any more help, just post or email.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window