putting led on a factory alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32855
Printed Date: July 18, 2025 at 10:36 PM

Topic: putting led on a factory alarm

Posted By: crash1ny
Subject: putting led on a factory alarm
Date Posted: May 27, 2004 at 7:18 PM

does any one know how to add a led on to a factory alarm so when you arm it the led will blink

thank you

Replies:

Posted By: auex
Date Posted: May 27, 2004 at 7:33 PM

Nope. The most you can do is wire a flashing led to turn on when the key is in the off position.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: raydawg357
Date Posted: May 28, 2004 at 10:29 AM

You can purchase a 3 wire led that will begin to blink as soon as you turn your vehicle off. It won't be tied in to the alarm but it will flash when the ignition is off and shut off when power is applied.

-------------
Do it right the first time

Posted By: crash1ny
Date Posted: May 28, 2004 at 8:43 PM

and how do i do that

Print Page | Close Window