Print Page | Close Window

OEM Lock Actuator install on 97 integra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32887
Printed Date: July 17, 2025 at 2:18 PM


Topic: OEM Lock Actuator install on 97 integra

Posted By: ELFster
Subject: OEM Lock Actuator install on 97 integra
Date Posted: May 28, 2004 at 12:20 PM

Hi all,

I've got a 97 integra coupe with aftermarket door locks.  They are tending to go every 1.5 years and I'm tired of taking the door panel off and replacing them -- that and they're loud as heck.

Found a guy with 2000 integra OEM (honda) door lock actuators, but don't know what they look like.  I'm not so worried about electrical connections -- we can make that work.  But do they bolt-on easily?  1997 and 2000 integras are essentially the same.  Would I need else anything to get the actuators in?  Would they fit?  Do they move the rod just like in the aftermarkets?  Pics would be ideal, but if you guys tell me they fit -- I'll buy them.




Replies:

Posted By: Velocity Motors
Date Posted: May 28, 2004 at 3:19 PM
The doors are essentially the same on the interior of the car. They will fit the car if they are OEM motors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window