2004 Durango alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32909
Printed Date: July 15, 2025 at 2:57 PM
Topic: 2004 Durango alarm
Posted By: khines5330
Subject: 2004 Durango alarm
Date Posted: May 28, 2004 at 5:28 PM
I am having issues with the parking lights and door locks. Door locks: Placed a 100Ohm and 330Ohm resistor on PURPLE / green (-) door lock/unlock wire.... cant get it to work. Parking Lights: Placed a 2KOhm resistor on RED / pink wire.....cant get it to work , but the chime activates. Please help
Replies:
Posted By: Velocity Motors
Date Posted: May 28, 2004 at 6:00 PM
Lock is negative trigger thru a 330 ohm resistor. Unlock is negative trigger thru a 100 ohm resistor. MUST use relays.
On vehicles without memory seats, the wire can be found in the driver kick, door harness. On vehicles with memory seats, the wire is in the driver door at the DMMM (Driver Memory Mirror Module). Parking lights : PINK/RED , Parking lights are negative trigger thru a 1100 ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: khines5330
Date Posted: May 28, 2004 at 6:37 PM
Can you give me a pin to wire explanation for the relays Thanks in advance ------------- Support our troops
Kill a terrorist
Posted By: godsegoizhuge
Date Posted: May 28, 2004 at 9:43 PM
Go get yourself the 451m from DEI. That'll make it a whole lot easier to do the doorlock relays, since it has both relays built into a small lil box.
Posted By: Velocity Motors
Date Posted: May 29, 2004 at 1:14 AM
Essentially the diagram will be like this: https://www.velocitymotorsport.com/images/install_notes/145.jpg except that the output wire of 30 goes to separate wires instead of the same wire. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: khines5330
Date Posted: May 29, 2004 at 7:14 AM
Thanks Velocity. You stated that the 30 pin output would go to seperate wires, which has me a bit confused. My wiring diagram for has a single wire (-) pulse door lock wire Violet/Green. Is there another wire I need to know about? Also any ideas on the parking lights relay setup? Tou all have been great. Thanks!
Posted By: Velocity Motors
Date Posted: May 29, 2004 at 10:09 AM
My apologies, the diagram is right and the Dodge uses a single wire system. I must have been tired last night and wasn't paying attention to what I was typing
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Velocity Motors
Date Posted: May 29, 2004 at 10:13 AM
Also the parking light wire will be set up just like the door wires but instead of the the diagram above use this one: https://www.velocitymotorsport.com/images/install_notes/P2N.jpg and have the resistor on pin 30 going to the PINK/RED wire. Your (+) parking light wire from your remote starter will now go to pin 85. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: khines5330
Date Posted: May 30, 2004 at 7:27 AM
Velocity; Just wanted to say thanks, Ill report back if succesful ------------- Support our troops
Kill a terrorist
Posted By: Velocity Motors
Date Posted: May 30, 2004 at 10:30 AM
No pproblem at all, let us know if you need more help
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: khines5330
Date Posted: May 30, 2004 at 3:48 PM
Worked great, Thank you very much. You wouldnt happen to know where the door open indication wires are do you? ------------- Support our troops
Kill a terrorist
Posted By: Velocity Motors
Date Posted: May 31, 2004 at 12:46 AM
The LF door trigger is purple, RF door is PURPLE / white, LR door is PURPLE / gray, and RR door is purple / YELLOW. Use all four wires and diode isolate each. The rear door triggers are in a large 74 pin plug near the fuse box. All trigger's are (-) polarity.
On vehicles without memory seats, the front door triggers are in the same plug as the rears. On vehicles with memory seats, the front door triggers are in the doors at the DMMM (Driver Memory Mirror Module), and PMMM (Passenger Memory Mirror Module).
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|