Clifford Concept 550 - Flashing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33078
Printed Date: May 10, 2025 at 2:58 PM

Topic: Clifford Concept 550 - Flashing

Posted By: andy318i
Subject: Clifford Concept 550 - Flashing
Date Posted: June 01, 2004 at 4:33 AM

Hi,

I am in the process of fitting a Clifford Concept 550 G5 and the instructions specify that I link H1/13 & H1/14 up to the parking lamps.

I would like the Direction Indicators to flash in the event of a trigger instead of the parking lamps.

Will it be OK to wire the above conections into the Direction Indicators instead.

Many thanks in advance for your help.

Replies:

Posted By: draasch
Date Posted: June 01, 2004 at 11:50 AM

yes, you may do that. if you have two wires and you have left and right indicators, then use one wire for each.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: draasch
Date Posted: June 01, 2004 at 11:51 AM

if you only have one indicator wire then you will only need one wire from the alarm. just make sure the one that is not used is capped off so it wont short out

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: andy318i
Date Posted: June 02, 2004 at 2:24 AM

Cheers Mate, 2 wires and I've wired them like you said......works a treat.

Thanks

posted_image

Print Page | Close Window