adding 4 Varard scanners

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3310
Printed Date: May 04, 2025 at 6:22 AM

Topic: adding 4 Varard scanners

Posted By: carguy411
Subject: adding 4 Varard scanners
Date Posted: September 03, 2002 at 10:46 PM

im doing an alarm install where the costomer wants 4 led scanners and i was wondering if i needed a reallay to use all for or can i just do it with out.

i was gonna use the starter kill ouput to trigger them and do it that way rather the other way u can hook them up

also on the starter kill wire is hooked up to a window up module for 4 windows

please let me know

thanks

Replies:

Posted By: the12volt
Date Posted: September 04, 2002 at 7:58 AM

Typically alarm outputs are rated around 20mA . Some may be more, but I'd play it safe and use the relay.

Posted By: carguy411
Date Posted: September 04, 2002 at 10:50 PM

ok nowhe want 4 varard scanners and an aditional 2 -4 varard hyper leds.

now this wont kill his battery right.i would think it would be fine considerin they are just leds ,not that much draw

anyway. how yould you wire up the relay(s) for this

please let me know

Print Page | Close Window