Clifford 3.5 Door Lock Question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33199
Printed Date: July 25, 2025 at 8:39 PM

Topic: Clifford 3.5 Door Lock Question

Posted By: tsu708
Subject: Clifford 3.5 Door Lock Question
Date Posted: June 02, 2004 at 10:14 PM

I Have a 2004 Ford F-250 Crew Cab. I can get the door locks to power lock and unlock by using the supplied 451M relay by ground to the lock /unlock feeds. But how do I get the locks to simulate the OEM? Example disarm once only unlocks drivers door, twice the others??

Thanks For any Help

Replies:

Posted By: auex
Date Posted: June 02, 2004 at 11:32 PM

Need another relay and 5 wire the driver's door unlock wire and hook it up to the unlock wire off of the alarm. Then hook the channel 3 output to what the unlock is hooked upto now. Then you have to program channel three to progressive unlock output.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: tsu708
Date Posted: June 03, 2004 at 10:15 AM

Thank you for the info.

Print Page | Close Window