Remote Locking BMW 325I

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3321
Printed Date: May 04, 2025 at 3:38 PM

Topic: Remote Locking BMW 325I

Posted By: ameson2001
Subject: Remote Locking BMW 325I
Date Posted: September 04, 2002 at 11:52 AM

Ive got a Cobra 7910 that was made in 07/01. Im putting it into my 1993 325i BMW. (E36 Version)

Fitting of the alarm is no problem. The thing im not sure on how to do is the Remote Central Locking. posted_image Does anyone know the colours for the lock/unlock wires?

Im guessing my car has a Positive pulse CDL. If this is right i have scanned and placed the wiring diagrams i have on the internet. You can see them here :-

https://www.geocities.com/ashleysbmw/rcl.html

I have been on the excellent Cobra website but they only have installation instructions for the current Model 3 Series.

Anyhelp is definetly appreciated.

Thanks

Replies:

Posted By: the12volt
Date Posted: September 04, 2002 at 1:11 PM

Here's the info I have for a '93 325:

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1993&make=BMW&model=325&ID=13301&type=Alarm

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1993&make=BMW&model=325&ID=13206&type=Alarm

Posted By: naughtydog
Date Posted: September 05, 2002 at 3:47 PM

The locking on this vehicle ( UK) is normally pins 24 and 25 of the cdl module located above the OS kick panel( it has a yellow plug).
On later vehicles the module is behind the glovebox and the locking is in pins 4 and 17.
You have to insert the pins iff the pin locations are empty.
The polarity is popsitive control.
Naughtydog

Posted By: lalur
Date Posted: September 06, 2002 at 7:29 PM

if that doesnt work u could always put an accuator un the driver door then it would lpck all doors

-------------
any help ask