Custom configure memory seats/mirrors?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33251
Printed Date: July 19, 2025 at 5:13 PM

Topic: Custom configure memory seats/mirrors?

Posted By: jaxon23
Subject: Custom configure memory seats/mirrors?
Date Posted: June 03, 2004 at 9:08 PM

i got my ungo SR5000 in and i know you have to hook to starter and ign 1 and ign 2 but i also have an accesory on my 1998 mitsubishi eclipse

1998 Mitsubishi Eclipse Security Information
Constant 12V+    White Ignition Switch Harness
Starter          BLACK/ Red Ignition Switch Harness
Ignition         BLACK/ White Ignition Switch Harness
Ignition 2       Blue Ignition Switch Harness
Accessory        Blue/Black Ignition Switch Harness

do i need to hook up to all of those wires?

Replies:

Posted By: swamprat323
Date Posted: June 03, 2004 at 9:08 PM

How does these work. I under stand it link by the remotes, but dose the alarm know were to set it or this has to be built in the car inself and there is pre program button or something of that nature.

Kyle

Posted By: swamprat323
Date Posted: June 03, 2004 at 9:09 PM

sorry this should be in its own topic, not sure how that happen

Posted By: jaxon23
Date Posted: June 03, 2004 at 9:20 PM

what the hell.....how did my post get that title?

Posted By: swamprat323
Date Posted: June 03, 2004 at 10:45 PM

Umm yea, not sure what happen here.

Posted By: Steve #1
Date Posted: June 04, 2004 at 12:13 AM

And they say computers don't make mistakes. posted_image

Swamprat, your vehicle needs to have memory seats for this to work. The alarm just tells the vehicle which setting to use based on which remote is used to disarm.

Print Page | Close Window