ride-pro air ride valve/clifford800IQ

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33253
Printed Date: May 29, 2024 at 2:27 AM

Topic: ride-pro air ride valve/clifford800IQ

Posted By: 02SS
Subject: ride-pro air ride valve/clifford800IQ
Date Posted: June 03, 2004 at 9:09 PM

Has anyone out there wired Air Ride Technologies Ride-Pro valves into a clifford alarm? I am basically needing some sort of diagram of how to do this. My main goal is to be able to control the valves via clifford remote. Any help with this subject would be great.

Replies:

Posted By: auex
Date Posted: June 03, 2004 at 9:26 PM

It isn't hard. Just wire a relay that is activated by an acc channel of your alarm, and then wire the output of the relays to the valve's +wire. Basically like the diagram

posted_image

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window