Print Page | Close Window

valet 554R queston

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33342
Printed Date: July 19, 2025 at 3:08 AM


Topic: valet 554R queston

Posted By: drtoofast
Subject: valet 554R queston
Date Posted: June 05, 2004 at 5:09 AM

i am installing a valet 554R on my wifes 1997 lexus es 300. If I am understanding this right ? there is a GREEN/ black wire on the secondary harness that will send a negitive pulse every time the remote start is activated. Should I tie this into my factory alarm disarm wire with a relay or is there another way to do it? I was under the impresion I wouldnt have to buy any relays. So I am kind of confused by that?

-------------
If it too fast your Too old...



Replies:

Posted By: draasch
Date Posted: June 05, 2004 at 11:43 AM
what does the book say you should use that wire for?

or that its just a neg pulse?

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: drtoofast
Date Posted: June 05, 2004 at 12:13 PM

 I reads  - Factory Diarm/Special Accessory Output ... so I am guessing it throws a neg pulse when you hit auto start? just my guess



-------------
If it too fast your Too old...




Posted By: auex
Date Posted: June 05, 2004 at 1:07 PM
^^^ Yes. You probably will need a relay.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.





Print Page | Close Window